Wednesday 20 May 2020

Know about the Significance of the Tyre Load Index for your Vehicle

Know about the Significance of the Tyre Load Index for your Vehicle


Load index is the maximum weight carried by each of the tyres at the maximum speed as per the manufacturer specifications. The maximum load is indicated by the load index as a tyre is meant to carry at a maximum pressure of inflation.

Representing the limit of load-bearing of every tyre, it is generally a two or three-digit number. Between the rating of speed and the reading of diameter, it is mentioned on the tyre sidewall. Every car owner must prefer to buy a tyre having a higher or equal load index as compared to the original tyres of the vehicle.


The tyres’ load index decides the load that your vehicle is going to carry. You can determine this by consulting a chart depicting the load indexes.


For example, if 95 is the load index mentioned on the tyre, then it indicates that the tyre can carry a load of 690 kg maximum.


You must purchase all the Tyres Irlam with an equal load index so that they get equal pressure of weights. The owner’s manual of your vehicle must be referred to identify the limits of the load. Typically, the tyres’ load indices ranging from 70 to 110 are used in light trucks and passenger cars.


The Tyres Middleton with higher or same load index must be used for replacing the old tyres. It is strongly suggested that the size of the rim on which you will fit the tyres must be either the same as the original. This is because the capacity of bearing load can be minimised by reduced width of the rim.


Your insurance may get invalidated if incorrect tyres are chosen for your vehicle. This is why the exact load capacity of the vehicle must be known to the vehicle owner.


What is the outcome if more weight as compared to load index is carried by the tyres?


The tyres and other major vehicle components get stressed if you overload your vehicle. Tyre failure may occur apart from expanded fuel utilisation and poor handling. Severe blowout, component separation or cracking might also be caused.

Can tyres with more load index as compared to the one advised by the manufacturer be used in the vehicle?

Yes, this is possible. But, before fitting such Tyres Irlam, you must get documentation of the vehicle’s manufacturer whether these tyres can be fitted to your vehicle and are suitable or not.

Can tyres with a lower load index as compared to the one advised by the manufacturer be used in the vehicle?

A tyre having a low load index is not recommended. The weight of the vehicle and the load in it can’t be supported by a tyre having a low load index as compared to what is recommended by the manufacturer.

No comments:

Post a Comment